How to Grow and Care for Alocasia Frydek

Alocasia Frydek Care

Here are a few important tips to note when caring for an alocasia frydek:

• Water thoroughly when the top inch of the soil is dry.
• Place alocasia frydek in bright, indirect light indoors, away from harsh rays that can harm its leaves.
• Plant alocasia frydek in an an aroid potting mix or otherwise chunky blend.
• Maintain high humidity around the plant.

Light

This Alocasia does best in bright, indirect light when grown indoors and in partial shade when grown outdoors. Ensure it is not exposed to prolonged periods of direct sun, as that will burn its velvety leaves. The perfect indoor spots is in front of a north- or east-facing window.

Soil

Alocasia frydek is an aroid that does best in an airy, rich, moist, but well-draining potting mix. Avoid using indoor potting soil without additional amendments, which compacts over time and suffocates the plant’s roots.

A mixture of one part potting soil, one part perlite, one part orchid bark, and one part compost or worm castings is ideal. You can also use a pre-made aroid mix.

Water

The soil should stay evenly moist but never waterlogged. Water thoroughly once the top 1 to 2 inches of soil is dry, allowing the excess water to drain from the bottom of the pot. If you are unsure about when to water, a moister meter can guide you.

The amount of water that this plant needs will vary greatly throughout the year. Water based on soil dryness, rather than sticking to a rigid schedule, which could result in watering too much or too little.

Temperature and Humidity

Alocasia frydek is native to the tropical rainforests of the Philippines, growing in warm, humid conditions. Outside of the Philippines, the plant is usually grown indoors as a houseplant because of its temperature and humidity requirements.

It does best in warm temperatures, between 65°F to 85°F. However, the plant is surprisingly winter-hardy in USDA zones 9 to 11, where it can grow outdoors year-round.

Typical household humidity levels are usually fine, but alocasia frydek thrives in elevated humidity. Try placing the plant on a pebble tray, utilizing a humidifier, or growing the plant in a naturally humid room like a bathroom, laundry room, or kitchen.

Fertilizer

Alocasia frydek should be fertilized monthly in the spring and summer when the plant is actively growing. Use a balanced liquid fertilizer, and apply it during regular watering. Stop fertilizing this plant in the fall and winter months.

Pruning

If you find yellowed, brown, or damaged leaves, remove them with a sharp, sterilized cutting tool, like a pair of pruning shears.

If your alocasia frydek is healthy and happy, you may notice a green spadix emerging from the center of the plant. This is a flower. Flowering is rare when alocasia frydek is grown indoors, but it may occur with mature plants.

Since the flowers are unremarkable compared to alocasia frydek’s distinctive foliage, many gardeners prune the flowers, cutting them off, allowing the plant to redirect energy towards growing more leaves. You can do this if you wish, but it isn’t necessary.

Propagating Alocasia Frydek

Like all Alocasia, the easiest way to propagate alocasia frydek is by division while repotting. However, Alocasia can also be propagated by growing the small corms unearthed during repotting, though this is a longer and more unpredictable process. Division and corm propagation should be done in the spring or early summer.

Division

To propagate an alocasia frydek by division, ensure the plant has at least two bulbs with actively growing leaves. Follow these steps:

1. Remove the plant from its pot and gently brush away as much soil as possible from the roots.
2. Separate at least one of the large bulbs from the rest of the plant using a sharp knife to slice between the bulbs.
3. Place the separated bulb in a pot and keep the soil evenly moist.

Growing Corms

To propagate an alocasia frydek by growing corms, ensure that you are using corms that are either attached to the main root system of the plant or have their own set of roots. Corms without roots are likely dead and won’t yield results. Follow these steps:

1. Gently cut the corms from the main root system if they are attached, or remove them from the soil if they have some of their own roots.
2. Place the corms in a dish with shallow water, leaving the top of the corm above the water but the bottom submerged.
3. Cover the dish with a glass container to create a humid, greenhouse-like environment.
4. Place the corms in a location that receives medium to bright, indirect light. Be patient, because signs of growth can take months. As long as the corm isn’t mushy, it is still alive and can grow.
5. Transfer the corm to soil once its roots are at least 2 to 3 inches long. Prepare an airy, well-draining potting mix, and plant the baby Alocasia into the mix, watering well.
6. Place it back in bright, indirect light, and keep the soil evenly moist. It may help to place a glass container over the small plant to provide extra humidity.

Potting and Repotting Alocasia Frydek

Alocasia frydek enjoys being slightly root-bound and only needs to be repotted once every two to three years. Repotting is best done in the spring or early summer when the plant is no longer dormant.

Choose a new pot that is one to two sizes bigger, and replace as much of the old potting mix as possible without damaging the plant’s roots.

Overwintering

When grown indoors, it is common for Alocasia to lose all of their leaves and go dormant over the winter. Don’t be alarmed if it looks like your plant has died once the weather outside starts getting colder. The plant will return in the spring if the bulb is still firm and alive.

Note that you do not need to fertilize or provide the plant with very much water when it is dormant. Water only when the top half of the soil has dried out. Once a new leaf emerges in the spring, resume regular watering.

Common Pests

Alocasia frydek is susceptible to many common pests, including fungus gnats, spider mites, mealybugs, scale, and thrips. Inspect your plant regularly for signs of pests to catch potential infestations early.

If you find pests, treat your plant immediately with neem oil or an indoor insecticidal soap, and isolate it from your other houseplants to prevent spreading.

Common Problems With Alocasia Frydek

As with many types of Alocasia, keeping alocasia frydek happy indoors is a challenge. It can thrive when given the right conditions, but always keep an eye out for the following issues.

Drooping Leaves

Alocasia are sensitive to sudden environmental changes and may exhibit droopy leaves when their growing conditions change. Changes in light, temperature, humidity, and watering can all cause droopy outer leaves that can sometimes die off.

As long as it is still getting the minimum amount of light, water, humidity, and warmth that it needs, your plant should perk back up once it has adjusted to its new conditions.

Losing Leaves

Sometimes if a change in the alocasia frydek’s growing environment is too sudden, it may begin losing some or all of its leaves. This is common in the fall and winter when temperatures drop and daylight hours shorten.

As the plant enters dormancy, it will drop all its leaves and grow them in the early spring months. While this can be shocking, as long as the bulb is firm and alive, your frydek will recover.

If you notice it is losing leaves during the spring or summer, evaluate its growing conditions to determine what may be the culprit. Has there been a sudden change in its environment? Is it getting enough light, water, and humidity? Finding the cause can prevent further foliage loss.

Yellow Leaves

Yellow leaves are usually a result of overwatering or under-watering. Ensure that the plant’s soil stays evenly moist. Keep alocasia frydek in a pot with drainage holes, so the excess water can easily drain away from its roots.